The Industrial Products Survey (EIP) is an annual statistical operation carried out by the INE, in collaboration with Idescat in the area of Catalonia, to obtain precise and reliable information on a wide set of industrial products.
Until 2020, the Survey was based on Council Regulation (EEC) No 3924/91 on the establishment of a community industrial production survey and on Commission Regulation (EC) No 912/2004, implementing said Council Regulation.
From 2021 onwards, the Survey has been governed by Regulation (EU) 2019/2152 of the European Parliament and of the Council of 27 November 2019 and by Commission Implementing Regulation (EU) 2020/1197 of 30 July 2020.
In accordance with the collaboration agreement signed by the INE and Idescat, the latter has translated into Catalan a list of almost 4,000 products on which this operation is based.
Idescat performs an annual data processing of the survey in order to expand the results available for Catalonia.
- From 2025 onwards, the data of the Industrial Products Survey are obtained by applying the PRODCOM-EIP, based on the new NACE Rev. 2.1 and compatible with the new CCAE-2025, which causes a break in series. The results can be consulted in the section "Available tables (from 2025)".
- In 2021 there is a break in series due to the implementation of the new European regulations and the results for the period 2021–2024 can be consulted in the section: "Available tables (2021–2024)".
- The results for 2008 to 2020 can be found in the section: "Historical series (2008–2020)."
- The operations prior to 2008 used the 1993 Catalan Classification of Economic Activities (CCAE-93). The results for the period 1993 to 2007 can be consulted in the PDF publication entitled Estadística, producció i comptes de la indústria (chapter 8). The earlier series (1986–1992), which used the National Classification of Economic Activities 1974 (CNAE-74), was disseminated through the publication Estadística i comptes de la indústria.
- For the Survey for reference years 2008 to 2024, the classification used is the CCAE-2009.
The main objectives of the survey are as follows:
- To provide complete and recent information on the products in the industrial sector, offering the results in sufficient detail for the study of a wide range of products, the analysis of its markets and the evolution of chronological series.
- To present information that is fully integrated with that corresponding with foreign trade data and that with other EU countries, thanks to the application of common methodologies.
- To publish information on annual industrial production as quickly as possible, approximately half a year after the end of the year of reference of the data.
1. Statistical units
The unit of information or observation, to which the questionnaire data refers, is the industrial establishment or local unit, defined as the unit producing industrial goods and services, located in a defined physical place and under the management of one single company.
The reporting unit, responsible for providing the data, is the legal unit, defined as the smallest legally autonomous unit operating one or more establishments.
2. Population scope
Until 2020, the survey's target population is the set of industrial establishments (irrespective of the main economic activity carried out by their parent company) responsible for 90% of the production in each class (4 digits) of the CCAE-2009.
For each of these classes, industrial establishments belonging to companies with 20 employees and over are surveyed. For certain classes (more than 50%), moreover, industrial establishments of enterprises with less than 20 employees are surveyed.
From 2021, the target population consists of all industrial establishments, regardless of whether the legal unit's main economic activity is industrial or not, and without any size limit. As a result, the survey covers 100% of production.
From 2025 onwards, the data are disseminated using the new PRODCOM based on the new NACE Rev. 2.1. Therefore, there is a break in series, so the 2025 data cannot be compared with those of previous years.
To find out more about the framework and sample design of the industrial product statistics, please consult the following methodological note from the INE (PDF).
3. Temporal scope
This is a continuous survey and its period refers to the calendar year. When the production cycle does not correspond to a calendar year, the information requested refers to production in the campaign that ended within the year to which the survey is referenced.
4. Geographical scope
The Survey covers the entire Spanish state (including Ceuta and Melilla as of 2021) and is designed to be able to offer results at autonomous community level.
Since 2021, the Survey only collects data on the production of establishments located within the national territory, as set out in the European regulations on structural business statistics (SBS). With the new sample design, the operation for Catalonia collects data from around 6,300 legal units, which report data on the production sold by approximately 7,000 industrial establishments located in Catalonia.
5. List of products
The information covered by the Survey is mainly defined on the basis of the PRODCOM product list, although they do not fully coincide. PRODCOM is a list of industrial products and services harmonised with the foreign trade classification, or Combined Nomenclature of the European Union, which includes mining and quarrying and manufacturing (sections B and C of the CCAE-2009, until 2024, and of the CCAE-2025, from 2025 onwards). However, it contains some exceptions:
- It does not contain divisions 05 (Mining of anthracite, coal and lignite), 06 (Extraction of crude petroleum and natural gas), or 09 (Mining support service activities).
- It does not include most of the industrial services identified in Classification of Products by Activity in the European Union (CPA) 2008 as "subcontracting operations".
- It also does not cover class 2446 (Processing of nuclear fuel).
- Within division 35, it also does not cover the following classes: 3513, 3514, 3515, 3522, 3523, 3524 or 3540.
Each product is defined in relation to one or various items of the Combined Nomenclature for foreign trade which will facilitate comparison of industrial production data with that obtained by means of foreign trade statistics.
Each heading of the PRODCOM list is represented by an 8-digit code, although a ninth digit may be added for country-specific requirements. The PRODCOM list used for the EIP consists of headings with 10-digit codes: a significant ninth digit is added, which makes it possible to identify certain typical products (such as olive oil) or products surveyed in Spain that are not part of the European PRODCOM list (such as oil refining or electricity production), and a tenth check digit is also incorporated to avoid errors during data entry or processing. This list can be consulted on the Idescat website under the name PRODCOM-EIP.
Until 2024, the meaning of the first eight digits is as follows:
- The first four coincide with the CCAE-2009, which corresponds to the Statistical Classification of Economic Activities in the European Community (NACE Rev. 2) which came into force in 2008.
- The first six digits make up the integration corresponding to the Statistical Classification of Products by Activity in the European Union (CPA).
- The seventh and eight digits indicate the classification of each of the PRODCOM products within each CPA heading.
For the classes 1020 (Processing and preserving of fish, crustaceans and molluscs), 1041 (Manufacture of oils and fats), 1051 (Operation of dairies and cheese making) and 3511 (Production of electricity), the coincidence with CCAE-2009 only occurs with the first three digits, since in this Classification these classes have been broken down with regard to NACE Rev. 2.
The Industrial Products Survey investigates manufacturing industry and the production of electricity, gas and steam (sections C and D of CCAE-2009), except for the following classes:
- Processing of nuclear fuel (class 2446)
- Manufacture of military fighting vehicles (class 3040)
- Transmission, distribution, trade and brokerage of electricity and gas (classes 3512, 3513, 3514, 3522 and 3523)
Mining and quarrying (section B of CCAE-09) is studied by the Ministry of Industry, Tourism and Trade.
These are outside the scope of the Survey:
- Non-economic industrial activities, that is, those that produce goods and services not intended for sale.
- Repair activities of certain consumer goods.
- Industrial activities carried out in establishments whose main activity is non-industrial.
No information on dairy products is available (group 105 of the CCAE-2009) for the period prior to 2015, the year of reference, although they fall within the scope of the Survey and have been researched.
The modifications, additions and removals applied to the PRODCOM list are recorded annually below the table for each product data sheet (see section 8 Tabulation).
From 2025, PRODCOM is based on the new NACE Rev. 2.1, but it maintains the same breakdown by levels of classes (4 digits) and CPA (6 digits).
However, there are small differences between NACE Rev. 2.1 and the CCAE-2025:
- Class 1020 (NACE Rev. 2.1) corresponds to 1021 and 1022 (CCAE-2025).
- Class 1041 (NACE Rev. 2.1) corresponds to 1043 and 1044 (CCAE-2025).
- Class 1051 (NACE Rev. 2.1) corresponds to 1053 and 1054 (CCAE-2025).
- Class 1623 (NACE Rev. 2.1) corresponds to 1623 and 1629 (CCAE-2025).
- Class 2361 (NACE Rev. 2.1) corresponds to 2367 and 2368 (CCAE-2025).
- Class 2511 (NACE Rev. 2.1) corresponds to 2513 and 2514 (CCAE-2025).
The Industrial Products Survey covers manufacturing and the production of electricity, gas and steam (sections C and D of the CCAE-2025), except for the following classes:
- Processing of nuclear fuel (class 2446).
- Transmission, distribution, trade and brokerage of electricity and gas (classes 3513, 3514, 3515, 3522, 3523, 3524 and 3540).
6. Variables
Until 2020, the survey variables were the quantity and value of the products being investigated.
As a general rule all products are measured in quantity and value. Nevertheless, for certain products, only information on the value of products is required. These headings are usually those relating to repair, installation and maintenance services, parts and components and headings whose description covers very diverse products. In the tables, the quantity and unit of these products are left blank.
The value always refers to the marketed product. The valuation criteria used to account for the value is the average net sales price, that is, including packing and packaging costs and excluding VAT and other consumption taxes, customer discounts and transport costs invoiced separately.
Quantities are measured according to two different criteria:
- For most products, the quantities refer to invoiced or sold production, and therefore coincide with the criteria to measure the value.
- For a series of intermediate products, generally obtained from integrated processes, the quantity requested is total production total, that is, what is produced and intended for sale (sales + stocks), plus what is reused in the process.
Not all headings in the PRODCOM list refer to physical products. Also included are codes corresponding to perfecting, repair and maintenance operations, as well as assembly work, all designated as industrial services.
Perfecting or finishing is understood to be those operations that once they have been carried out, do not alter the form of the product, such as dyeing, impregnation, printing, varnishing, nickel plating, etc. Distinction is made between the perfecting of goods produced by the company (direct perfecting), the perfecting of purchased products (inhouse perfecting work) and perfecting as the subcontracting of products belonging to a third party (outsourced perfecting). Only the latter two are assigned in the finishing headings created for such a purpose. The perfecting of products manufactured by the company itself is classified along with the product.
Repair and maintenance work is classified under the corresponding codes and its value corresponds to invoiced repair and maintenance costs. Repair and maintenance operations that constitute major repairs and largely transform the product (changing almost all the parts of a machine, changing the design of a piece of jewellery, a fur item, etc.) are considered production and are classified under the corresponding product codes and not under the codes for their repairs.
Although there is a general rule by which repair and maintenance services as long as they are linked to the manufacture of industrial equipment are included in the industrial sector, there are exceptions to this rule in cases of:
- Repair of motor vehicles and motorcycles (classes 4520–4540)
- Repair of computers and personal and household goods (division 95)
Assembly or installation is considered to be the putting together of several elements into a single product or several products in order to form a more complex installation. If the assembled products are also manufactured by the same company, the assembly is coded together with the manufactured product under the corresponding product code. When the assembling company is different from the one that manufactures the product, the assembly value is coded under the corresponding PRODCOM codes. The value of the assembly service includes the invoiced assembly costs plus the cost of the materials needed to provide the service and excludes the value of the assembled products not manufactured by the company responsible for carrying out the assembly.
In addition to quantity and value, the table sorting the manufactured products that are not subject to statistical confidentiality by the value of their sales, includes a column indicating the position occupied by each product in descending order. This information also appears on the sheet for each manufactured product, which shows the historic series of results for the product.
Where any information is not available, the symbol ":" is used to indicate this.
From 2021 onwards, in-house production and production carried out as a subcontractor are studied separately for each product.
The data published from 2021 onwards refer to the value of in-house production sales in millions of euros.
In-house production
In-house production is considered to have taken place in an industrial establishment during the reference year if products made in the establishment by its own means have been sold directly on the market, or if industrial services have been provided to third parties by its own means.
For most products, information on both quantity and value is required. However, for certain products, only information on value is required. These headings generally include those relating to repair, installation and maintenance services, parts and components, and other headings covering a wide variety of products. In the tables, the quantities and units of these products are left blank.
For certain products, information on the reuse of manufactured products (in quantity) and the amount of production intended for stock is also requested.
Value always refers to marketed production. The valuation criterion used to account for value is the average net sales price, that is, including packing and packaging costs and excluding VAT and other consumption taxes, customer discounts and transport costs invoiced separately.
Quantities are measured according to three different criteria:
- For most products, the quantity refers to the invoiced or sold production, and therefore coincide with the criterion used to measure value.
- For a series of intermediate products, generally obtained in integrated processes, the quantity requested is total, that is, what is produced and intended for sale (sales + stock) plus what is reused in the same process.
- Lastly, for products in the branch of "Electricity, gas, steam and air conditioning supply", the quantity refers to the in-house production sold plus the amount reused in the production process.
Production carried out as a subcontractor
As stated in Commission Implementing Regulation (EU) 2020/1197 of 30 July 2020, production is deemed to have been carried out as a subcontractor in an industrial establishment during the reporting period if the requirements set out in the CPA guidelines for this type of operation are met. That is, production is considered to have been carried out as a subcontractor if payments have been received in the reference year from subcontracting companies in return for the production carried out in the industrial establishment where the subcontracting companies have provided the raw materials used for the production of a particular product. Subcontracting companies may supply a small number of inputs for the completion of this work.
For most products, information on the quantity produced as a subcontractor and payments received is required; for others, only payments received are requested.
Payments received for production carried out as a subcontractor include packing and packaging costs but exclude VAT and other consumption taxes, customer discounts and transport costs invoiced separately.
Data on subcontracted production are requested for all products except those considered to be industrial services.
7. Questionnaires and sectorisation
From 2021 onwards, customised questionnaires are sent to each industrial establishment, including a selection of products.
If the industrial establishment provided information the previous year, the questionnaire only requests information on the products for which information was previously provided. For these products, the data for the study year is requested. If, in addition, there are manufactured products that do not appear in the list, the establishments are also asked to provide information on those products.
If there is no prior information on the industrial establishment, the customised questionnaire contains a list of products related to its economic activity that, according to the data obtained from the previous year's survey, are most produced by the industrial establishments in the same activity sector. In this case, the establishments are also requested to provide information on the products they have manufactured that do not appear in the aforementioned list.
The information is collected through the INE's institutional collection system, IRIA. The questionnaire is completed almost exclusively (over 90%) online.
From 2025 onwards, the information obtained from the questionnaires for Catalonia is presented broken down into the 242 classes of the CCAE-2025 and the 25 divisions of the CCAE-2025 to which they belong. The 25 divisions are similar to those disseminated with the CCAE-2009.
For more information on the different levels of the new classification, you can consult the CCAE-2025 on the Idescat website.
Until 2024, the information is presented broken down into 60 branches which, in turn, for reasons of consistency and comparability, are aggregated into the 25 divisions of the CCAE-2009. The correspondence between these sectoral breakdowns and the CCAE-2009 is shown below:
| Divisions and branches | CCAE-2009 | |
|---|---|---|
| (*) Not including classes 2446, 3040, 3512–3514, 3522 and 3523 | ||
| n.e.c.: Not elsewhere classified. | ||
| Food products | 10 | |
| Meat and meat products | 101 | |
| Processed and preserved fish, crustaceans and shellfish | 102 | |
| Processed and preserved fruit and vegetables | 103 | |
| Oils and vegetable and animal fats | 104 | |
| Milk, cheese, ice cream and other dairy products | 105 | |
| Milled products, starch, dough and pastries | 106, 1071, 1072 | |
| Sugar, cocoa, chocolate and confectionary | 1081, 1082 | |
| Food products n.e.c. | 1073, 1083–1086, 1089 | |
| Animal food | 109 | |
| Beverages | 11 | |
| Beverages | 11 | |
| Tobacco products | 12 | |
| Tobacco products | 12 | |
| Textile | 13 | |
| Dressmaking and textiles | 131, 132 | |
| Textile finishing services | 133 | |
| Other textiles | 139, 143 | |
| Wearing apparel | 14 | |
| Wearing apparel, except knitted apparel | 141, 142 | |
| Knitted apparel | 143 | |
| Leather and footwear | 15 | |
| Leather and fur, prepared, tanned or finished | 1511 | |
| Leather articles and footwear | 1512, 152 | |
| Wood and cork, except furniture | 16 | |
| Sawn and planed wood and wood prepared for industrial use | 161 | |
| Wood, cork and basket making | 162 | |
| Paper | 17 | |
| Pulp, paper and card | 171 | |
| Paper and card articles | 172 | |
| Printing and recording services | 18 | |
| Printing and recording services | 18 | |
| Coke and refined petroleum products | 19 | |
| Coke and refined petroleum products | 19 | |
| Chemical products | 20 | |
| Inorganic basic chemicals, dyes and pigments | 2011–2013 | |
| Other basic organic chemical products | 2014 | |
| Fertilisers, pesticides and other agro-chemical products | 2015, 202 | |
| Plastic and synthetic rubber in primary forms | 2016, 2017 | |
| Paints, varnishes, printer inks and mastics | 203 | |
| Soaps, detergents, perfumes and cosmetic products | 204 | |
| Other chemical products and artificial and synthetic fibres | 205, 206 | |
| Pharmaceutical products | 21 | |
| Pharmaceutical products | 21 | |
| Rubber products and plastic materials | 22 | |
| Rubber products | 221 | |
| Plastic products | 222 | |
| Other non-metal minerals products | 23 | |
| Glass and glass products | 231 | |
| Ceramic products and terracotta for construction | 232–234 | |
| Cement, lime and gypsum and concrete, lime and cement products | 235, 236 | |
| Ornamental stones and for construction and other non metal mineral products | 237, 239 | |
| Metallurgy product and basic iron, steel and iron-alloy | 24 (*) | |
| Basic products, tubes, pipes and similar of steel and iron | 241–243 | |
| Precious metals and other non ferrous metals; cast irons | 2441–2445, 245 | |
| Metallic products except and machinery and equipment | 25 | |
| Metal construction elements; large tanks and steam generators | 251–253 | |
| Forging and stamping of metals; powder metallurgy and treatment of metals | 255, 256 | |
| Knife making and cutlery articles, ironmongery articles | 257 | |
| Arms and munitions and other metal products | 254, 259 | |
| Computer, electronic and optical products | 26 | |
| Computer and electronic products | 261–264 | |
| Instruments for measuring and optics and photography and electromedical equipment | 265–268 | |
| Electrical equipment | 27 | |
| Electric machinery and materials, except domestic appliances | 271–274, 279 | |
| Domestic appliances | 275 | |
| Machinery and equipment n.e.c. | 28 | |
| General use machinery, except portable electrical tools | 281, 2821–2823, 2825, 2829 | |
| Power tools | 2824, 284 | |
| Agriculture and forestry machines | 283 | |
| Other machinery for specific purposes | 289 | |
| Motor vehicles, trailers and semi-trailers | 29 | |
| Motor vehicles, trailers and semi-trailers | 29 | |
| Other transport equipment | 30 (*) | |
| Other transport equipmentc | 301–303, 309 | |
| Furniture | 31 | |
| Furniture | 31 | |
| Other manufactured goods | 32 | |
| Jewellery articles, musical instruments, sports equipment and toys | 321–324 | |
| Instruments and supplies for medicine and dentistry | 325 | |
| Manufactured articles n.e.c. | 329 | |
| Repair and installation of machinery and equipment | 33 | |
| Repair and installation of machinery and equipment | 33 | |
| Electrical, gas, steam energy and air conditioning | 35 (*) | |
| Electric, gas, steam energy and air conditioning | 3515–3519, 3521, 353 | |
Until 2020, industrial production is divided into 81 sectors, grouped by economic activity products with common characteristics. Thus, to facilitate collection, it is not done by means of a single form; instead, a form is drawn up for each sector. The Ministry of Industry, Tourism and Trade collects the information corresponding to two of the sectors (extraction of metallic and non-metallic minerals), while the INE is responsible for the rest.
In many questionnaires, in addition to the 'typically' products of the corresponding economic activities so-called 'atypical' products are included, which correspond to the possible production of secondary products derived from the main activity in the same establishment.
Establishments are coded according to the CCAE corresponding to their primary activity, defined as the one that provides the greatest value added. If this information is not available, they are coded according to the activity that generates the greatest production value or the one that employs the greatest number of persons.
For the 2008–2020 series, the information for Catalonia obtained from the 79 questionnaires is distributed into 57 branches, which, in turn, are aggregated into 16 groupings. The correspondence between these sectorisations and the CCAE-2009 is shown below:
| Groups and branches | CCAE-2009 | |
|---|---|---|
| (*) Not including classes 2446, 3040, 3512–3514, 3522 and 3523 | ||
| n.e.c.: Not elsewhere classified. | ||
| Food, beverages and tobacco | 10–12 | |
| Meat and meat products | 101 | |
| Processed and preserved fish, crustaceans and shellfish | 102 | |
| Processed and preserved fruit and vegetables | 103 | |
| Oils and vegetable and animal fats | 104 | |
| Milk, cheese, ice cream and other dairy products | 105 | |
| Milled products, starch, dough and pastries | 106, 1071, 1072 | |
| Sugar, cocoa, chocolate and confectionary | 1081, 1082 | |
| Food products n.e.c. | 1073, 1083–1086, 1089 | |
| Animal food | 109 | |
| Beverages and tobacco | 11, 12 | |
| Textiles and dressmaking | 13, 14 | |
| Dressmaking and textiles | 131, 132 | |
| Textile finishing services | 133 | |
| Other textile products and knitwear | 139, 143 | |
| Garments other than knitwear | 141, 142 | |
| Leather and footwear | 15 | |
| Leather and fur, prepared, tanned or finished | 1511 | |
| Leather articles and footwear | 1512, 152 | |
| Wood and cork, except furniture | 16 | |
| Sawn and planed wood and wood prepared for industrial use | 161 | |
| Wood, cork and basket making | 162 | |
| Paper, graphic arts and reproduction of recorded supports | 17, 18 | |
| Pulp, paper and card | 171 | |
| Paper and card articles | 172 | |
| Graphic arts and reproduction on recorded supports | 18 | |
| Oil refining, chemical and pharmaceutics products | 19–21 | |
| Oil refinery, basic inorganic chemical products, colorants and pigments | 19, 2011–2013 | |
| Other basic organic chemical products | 2014 | |
| Fertilisers, pesticides and other agro-chemical products | 2015, 202 | |
| Plastic and synthetic rubber in primary forms | 2016, 2017 | |
| Paints, varnishes, printer inks and mastics | 203 | |
| Soaps, detergents, perfumes and cosmetic products | 204 | |
| Other chemical products and artificial and synthetic fibres | 205, 206 | |
| Pharmaceutics products | 21 | |
| Rubber products and plastic materials | 22 | |
| Rubber products | 221 | |
| Plastic products | 222 | |
| Other non-metal minerals products | 23 | |
| Glass and glass products | 231 | |
| Ceramic products and terracotta for construction | 232–234 | |
| Cement, lime and gypsum and concrete, lime and cement products | 235, 236 | |
| Ornamental stones and for construction and other non metal mineral products | 237, 239 | |
| Metallurgy product and basic iron, steel and iron-alloy | 24 (*) | |
| Basic products, tubes, pipes and similar of steel and iron | 241–243 | |
| Precious metals and other non ferrous metals; cast irons | 2441–2445, 245 | |
| Metallic products except and machinery and equipment | 25 | |
| Metal construction elements; large tanks and steam generators | 251–253 | |
| Forging and stamping of metals; powder metallurgy and treatment of metals | 255, 256 | |
| Knife making and cutlery articles, ironmongery articles | 257 | |
| Arms and munitions and other metal products | 254, 259 | |
| Computer and electronic equipment and electrical materials | 26, 27 | |
| Computer and electronic products | 261–264 | |
| Instruments for measuring and optics and photography and electromedical equipment | 265–268 | |
| Electric machinery and materials, except domestic appliances | 271–274, 279 | |
| Domestic appliances | 275 | |
| Machinery and equipment n.e.c. | 28 | |
| General use machinery, except portable electrical tools | 281, 2821–2823, 2825, 2829 | |
| Power tools | 2824, 284 | |
| Agriculture and forestry machines | 283 | |
| Other machinery for specific purposes | 289 | |
| Transport materials | 29, 30 (*) | |
| Motor vehicles, trailers and semi-trailers | 29 | |
| Boats and ships, locomotors, airships and other transport materials | 301–303, 309 | |
| Furniture and other manufactured products | 31, 32 | |
| Furniture | 31 | |
| Jewellery articles, musical instruments, sports equipment and toys | 321–324 | |
| Instruments and supplies for medicine and dentistry | 325 | |
| Manufactured articles n.e.c. | 329 | |
| Repair and installation of machinery and equipment | 33 | |
| Reparation and installation of machinery and equipment | 33 | |
| Electrical, gas, steam energy and air conditioning | 35 (*) | |
| Electric, gas, steam energy and air conditioning | 3515–3519, 3521, 353 | |
8. Tabulation
The results of Idescat's statistical operations using the data collected by the Industrial Product Survey (EIP) from establishments located in Catalonia are presented in four different tables. The results for the latest year published remain provisional until the results for the following year are issued, at which time they are updated and become definitive. The tables are as follows:
From 2025 onwards:
- A table of totals for the sales of the products manufactured in each of the 25 divisions of the CCAE-2025 and the 242 classes of the CCAE-2025. Clicking on a division expands the results for its classes, and clicking on a class opens the table described below.
- A table for each class of economic activity listing all its manufactured products. For each product, the name, the PRODCOM-EIP code (6 digits), the value (in thousands of euros) and the quantity (in the corresponding unit) of sold production are shown. If this information cannot be disseminated for reasons of statistical confidentiality or low statistical reliability, only the product code and name are shown. This table gives access to the historical series of results for each product by clicking on it.
- A table with all manufactured products that are neither subject to statistical confidentiality nor of low statistical reliability. This table lists, ordered by sales value, the 50 products with the highest sold production. A bar at the foot of the table allows groups of 50 products to be added progressively. The sort order (descending or ascending) or the sorting variable itself can be changed, since it is also possible to sort by code and to keep adding groups of 50 products sorted by code in the chosen order.
- A table generated by the search engine with the set of products whose name or PRODCOM code contains the sequence of characters or digits entered in the search box. Once a product is selected from the list of results, the product sheet is shown, which consists of the historical series of results for that product: value, quantity and unit of sold production, and position in the sales ranking.
It is also possible to download an annual Excel sheet with the exhaustive list of all the products surveyed by the EIP (at 6 digits of the PRODCOM-EIP), including those subject to statistical confidentiality, those of low statistical reliability and those not manufactured in the reference year.
Until 2024:
- The table of totals for the sales of the products manufactured in each of the 25 divisions of the CCAE-2009 and the 60 branches that grouped different classes of the CCAE-2009.
- A table for each branch.
- A table with all manufactured products that are neither subject to statistical confidentiality nor of low statistical reliability.
- A table generated by the search engine with the set of products that in their name or PRODCOM code.
An annual Excel sheet with the exhaustive list of all the products surveyed by the EIP (at 6 digits of the PRODCOM-EIP) can also be downloaded.
From 2021 onwards, the data published correspond to the value of sales of in-house production in millions of euros, but for reasons of statistical reliability only products up to 6 digits of the PRODCOM-EIP code are shown
Until 2020:
- A table of totals for the sale of products manufactured in each of the 16 groups and 56 branches into which the researched area of production is grouped. Clicking on a group shows the results for the branches and clicking on the branch shows the table described next.
- A table for each branch that shows all of the manufactured products. For each product he PRODCOM-EIP code (10 digits), the value (in thousands of euros) and the quantity (in the corresponding unit) of sold production are shown. f this information cannot be disseminated for reasons of statistical confidentiality (when the number of enterprises manufacturing the product is fewer than 4), only the product code and name are shown. Where at a more aggregate level (8 or 6 digits of the PRODCOM-EIP) there is a sufficient number of producing companies, the value and quantity of two or more products that were subject to statistical confidentiality at the disaggregated level have been added. This table gives access to the historical series of results for each product by clicking on it.A table showing all of the manufactured products that are not subjected to statistical confidentiality. This table lists, ordered by sales value, the 50 products with the greatest sold production. A bar at the bottom of the table allows groups of 50 products to be added progressively. The sort order (descending or ascending) or the sorting variable itself can be changed, as it is also possible to sort by code and to include groups of 50 products sorted by code in the selected order.
- A table showing all of the manufactured products that are not subjected to statistical secrecy. This table shows, ordered by value of their sales, the 50 products with the greatest sold production. A bar at the bottom of the table can be used to incorporate groups of 50 products. It is possible to change the order (descending or ascending) or the actual variable used to order, as it is also possible to order by code and to include groups of 50 products ordered by codes in the selected order.
- A table generated by the search engine using the set of products that in their name or PRODCOM code is a sequence of characters or numbers as entered in the search window. Once a product is selected from the list of results, the product sheet is shown, which consists of the historical series of results for this product: value, quantity and unit of sold production and position in the sales ranking.
Finally, for each of the years available there is the possibility of downloading an EExcel sheet with a comprehensive list of all of the products researched by by the EIP (at 10, 8 and 6 digits of the PRODCOM-EIP), including those that are subject to statistical confidentiality and those not manufactured in the year of reference.